ASME
Pittsburgh Section
Archives
|
|
ASME
Pittsburgh Section |
||
|
Looking
for something specific?
"The destructive effects of miserable morale, intimidated workers, or
arrogant bosses....can be read in signs such as decreased productivity,
an increase in missed deadlines, mistakes and mishaps, and in an exodus
of employees to more congenial settings. There is, inevitably, a cost
to the bottom line from low levels of emotional intelligence on the job." Your Company Name Could Be Here!
|
This Month's Articles:
Would You Like To Be A Pittsburgh Section Sponsor? If you sponsor ASME Pittsburgh, we will feature your company's products and services in our newsletter and capture the attention of 1500+ members to inform them of your company, or on this site and be on the WWW. For more information click here or contact anyone on the Executive Committee.
September Event - Engineers Response To Homeland Security
Program Description: Part 1 - Some Key Initiatives by ASME ITI and the Nuclear Industry Significant efforts have been taken over the past four years by the engineering community in response to the terrorist attacks on the U.S. on September 11, 2001. ASME ITI and the Pittsburgh business community have key actions underway at national and regional levels, respectively, to assist in enhancing the protection and response to terrorist events as well as other man-made or natural disasters. A review of key initiatives by ASME ITI in the use of risk analysis and management for critical asset protection (RAMCAP) guidance for terrorist threats and homeland security will be provided. ASME ITI's efforts to support national homeland security regional initiatives, including collaboration with cognizant organizations in the United Kingdom will be discussed. Some key technologies being provided by the nuclear power industry will also be summarized. Finally, a review of the formation, needs, and key actions that are underway via the Pittsburgh Regional Business Coalition for Homeland Security will be provided to show proactive steps being taken by leaders in our hometown to better respond to homeland security challenges. Time will be allotted for open discussion with the audience.
Read the latest ASME Pittsburgh Newsletter here (in .pdf - may take a moment to load - please be patient) This month's featured articles include: Download Adobe's free Acrobat Reader to view PDF files.
The newsletter is currently published well ahead of the e-mail notice here on this website. All you have to do is browse our website at your convenience and you can find it here anytime. Previous newsletters will still be available via the Archives page. **If you would like to have the newsletter in printed form, you can simply open the above link and use the print option on your browser. ** In addition to the newsletter, this website will continue to have the latest information on monthly events, tours, news, contact information, job postings, resources, archives, and a host of other information to keep you informed.
A Message from the Chair Dear members, We have some exciting programs lined up for this year. On September 27, we are privileged to have Mr. Ken Balkey and Mr. Mike Comiskey update us on Homeland Security. Ken is a Consulting Engineer for Westinghouse Electric Company, Senior Technical Advisor ASME Innovative Technologies Institute, LLC and Vice President of ASME Nuclear Codes and Standards. Mike is the Executive Director of the Pittsburgh Regional Business Coalition for Homeland Security. This is a follow-up to the presentation at the 2003 Awards Banquet. Our annual Joint professional/student meeting will be on October 5 at Carnegie Mellon University. We welcome Senior Section members from various fields of employment: design, sales, education, management, from small start-ups and large companies, to attend and interact with the students. The students have the opportunity to ask lots of questions and we provide the pizza. In November, McKesson Automation will host a Tour of their Cranberry facility. They manufacture and install robotic dispensing systems in hospitals for prescription medication. Moving into next year, we plan to support the Rube Goldberg Contest in December, the Future Cities Competition in January, National Engineers Week in February and the Pittsburgh Regional Science Fair. All of these events need volunteers, so I would encourage you to become involved. The students put forth a terrific effort and your individual profit is immeasurable. We are part of a new ASME. Local sections were affected by the recent reorganization of the ASME structure. Starting this year, our funding from NY has been reduced by 25%. However, next year we are required to be a self-sustaining organization. Starting in July 2006, no percentage of the membership dues will be distributed to the local sections. Throughout the year, we will be inviting you to get more involved with your local section. We welcome your participation in activities as well as your feedback and hope that you find this a rewarding year. Sincerely, Lori Rankin, Chair
Your E-Mail Address - The Key to ASME International Did you know that your e-mail address is the key to what's happening at ASME? By providing us with your current e-mail address, you can learn about events taking place in your local section, such as professional development courses, industry tours, section meetings, lectures, networking opportunities, and technical conferences. Updating your e-mail address online only takes a few minutes. To access your membership information, go to www.asme.org. Click on the "Members Only" tab to log onto this site. Be sure to have your member number on hand. After logging on to Members Only, select the "Change of Address and Information" link, located on the upper right-hand side of your screen. From this screen, you will be able to update your primary contact information. So don't miss out on all that ASME has to offer! If you have any questions about your membership information, contact InfoCentral at infocentral@asme.org.
Section Election Results: The following members were elected for the 2005-2006 Session: Chair- Lori Rankin The following appointments were made for the 2005-2006 Session: Vice-Chair - Rich Horne Future City Competition Winners Announced: Thanks to all for your support this year in the 2005 Future Cities Competition. It was a huge success. The students worked vigorously to complete their projects, and your supprt enabled us to award these students for their efforts. The winning team for Most Effective Moveable
Part was Smethport Area Jr High. Also visit www.futurecitypittsburgh.org. See the list of winners here. Congratulations to all !! And Now..............A Word
From Our Sponsor!!!!...............
Notices Our website address has changed! It is now http://sections.asme.org/PGH.
Dear ASME Member, ASME has a new focus. As many of you may already know, in recent years ASME has experienced stagnant sales of its products and services, a reduction of its financial reserves, decreasing participation by members and others in its programs and activities, declining corporate support and declining membership, particularly among engineers under age 40. These trends, which could no longer be ignored, led to the recent reorganization of ASME. The changes, approved by the Board of Governors in June, will improve ASME's viability and allow it to concentrate on its core assets: providing knowledge, community and advocacy to mechanical engineers. Moving forward, leadership in all Sectors is in place and is working out the last organizational decisions that will enable us to direct our resources to the challenges ahead. With ASME's strategic focus on key market areas - young engineers, industrial companies, government entities - along with the determination to address the global practice of engineering and to generate new sources of revenue to support ASME's mission, I am confident that we have positioned the Society for long-term success. I encourage your continued participation in ASME's mission through the channels familiar to you and through new opportunities such as our Communities of Practice. We will keep you informed, through ASME.org and through our publications, on how we are meeting the challenges we face. Thank you for your continued support in making ASME a premier organization for all engineers. Sincerely, Gene Feigel ASME President 2005-2006
Upcoming Meetings The next Executive Committee meeting will be on Friday, September 9, 2005 at 7:30 AM at Denny's Restaurant (map), 3980 Wm Penn Hwy, Monroeville,, and is open to anyone interested. If you wish to attend, please contact Lori Rankin at (412) 688-2093 or any member of the Executive Committee. (Meet some of the gang!) See the Calendar page for the year's upcoming programs.
Business Calendar The Pittsburgh Business Calendar publishes a calendar of events for the Pittsburgh business community. Click on the link for the full calendar of events. (http://www.businesscalendar.org/) You can also check out the ESWP techniCALENDAR for upcoming events at: http://www.eswp.com/techniCALENDAR/the_calendar.htm
The Value of Your Membership Just Increased!! Take advantage of the New Discounted Dues Structure. If you have earned a baccalaureate degree or an advanced degree and have been out of school 4 years or less you can can save up to 60% on Member Dues. Check out the current member dues rates available at http://www.asme.org/member/info.html.
ASME International News The Online Newspaper of the American Society of Mechanical Engineers Mechanical Engineering - the magazine of the ASME
**ASME's Mechanical Engineering Magazine periodically contains the new supplement Engineering Management. Current and would-be managers can turn to this supplement to pick up some of those skills needed in today's work environment. Go to the links below: July '04: http://www.memagazine.org/emjuly04/index.html November '04: http://www.memagazine.org/emnov04/index.html March '05: http://www.memagazine.org/emmar05/index.html July '05 http://www.memagazine.org/emjuly05/index.html If you missed our April tour of the Seward Power Plant tour, you missed a remarkable event. But you can still take the virtual tour here!! www.reliant.com/files/450457_Seward_Tour_and_Dedication.pps Learn to make really cool paper airplanes!! Visit ASME's Airplane Archive at: http://www.asme.org/events/flight/paperarchive.shtml?URL=www.asme.org "Man must rise above the Earth - to the top of the atmosphere and beyond - for only thus will he fully understand the world in which he lives." - Socrates **Alternative fuels blocked by national policy? Brainteasers ! A monthly mechanical engineering problem to test your knowledge or try your luck. A new problem every month. The possibilities are endless - kinematics, fluid mechanics, physics......! You never know what we'll throw at you next! This month's problem: (something easy) A 2" length of steel bar is elongated to a length of 2.010"
at which time the diameter changed from 0.5050" to 0.5042".
Calculate Poisson's Ratio of this material.
Recognizing our Fellow Members The Fellow Grade is the highest elected grade of membership within ASME, the attainment of which recognizes exceptional engineering achievements and contributions to the engineering profession. Did you know there are 53 members in our Section who are Fellows? If you know any of them, please congratulate them on their achievement! Adnan Akay, Harvey Allen, Cristina Amon,
Edmund Appleby, John Barsom, Donald Burnham, Jonathan Cagan, Norman Chigier,
Minking Chyu, Ronald Coffield, Maria Comninou, Arthur Croll, Ellison Davison,
James Di Perna, David Dietrich, W. Doty, L. Ike Ezekoye, Martin Falk,
Jerry Griffin, Donald Griffin, Gus Holabeck, Charles Jones, Wilbur Kennicott,
William Lankford, Jack Maurer, Bertram Milleville, Jack Moore, William
O’Donnell, Leighton Orr, Fletcher Osterle, Sam Palusamy, William Purcell,
David Purdy, Arthur Rathbun, Stephen Roth, Wilfred Rouleau, Sunil Saigal,
George Saxon Sr.,Stanley Schaffer, Allen Selz, Patrick Smolinski, Alfred
Snow, Paul Steif, Theodore Stern, Remco Waszink, John Wesner, Jonathan
Wickert, Donald Wiebe, Bernard Winer, Savio Woo, Tse Chien Woo, Shi-Chune
Yao, Campbell Yates.
Voices of Innovation A new daily public radio program, "Voices of Innovation," launched by the American Association of Engineering Societies with generous support from ASME, features some 200 engineers in 2-minute programs that explore and celebrate the world of engineering. The program began airing in April 2002. To be considered for one of the programs, engineers need to submit a story idea form, which is available at www.voicesofinnovation.org.
E-Mentoring Program to Expand to Young Engineers The success of last year's program and the enthusiastic response of members wanting to become mentors has fueled the expansion of the e-Mentoring program. This program for student members is expanding to include mentoring services for engineers who have recently (5 years or less) graduated from engineering school. Young engineers can now benefit from the career advice of more seasoned engineers in their particular field of interest. Recent graduates may get even more benefit from a mentoring relationship, since they have some experience and may have more specific career questions. How does the program work? Students and young engineers (mentees) seeking a mentor choose from a database of names, which gives information about the mentor's background, experience and engineering specialty. Mentees are then asked to fill out an online application indicating their top three choices for mentors. The mentor requests are evaluated by ASME and matched on a first come, first served basis. Only members are eligible to participate in this program as a mentor or mentee. Anyone wishing to find a mentor or to volunteer to become a mentor for a student or young engineer member should visit the website at www.asme.org/ementoring. Volunteers can choose to mentor a student, a young engineer or both. Questions about the program should be addressed to Deidra Hackley, at hackleyd@asme.org.
Member Get a Member 2004-2005 Member-Get-A-Member Campaign - Invest in the Future of Mechanical Engineering! Recommend a paid new member during the 2004-2005 Member-Get-A-Member (MGAM) campaign and ASME will contribute 50% of their first year dues to scholarships for student members. Personally inviting a friend or colleague is straightforward and simple. At the same time, you will receive a Recognition for Volunteerism certificate of appreciation for 2 or more paid new members signifying your support of the mechanical engineering profession and its future. It's easy to recommend membership to your colleagues! New members will experience the benefits of ASME membership - technology transfer, access to a network of engineering experts, assistance with career advancement, leadership opportunities, and much more. For complete program details including a downloadable membership application, log onto http://www.asme.org/membershipdrive Your continued support of the Member-Get-A-Member Campaign is important to its success and we appreciate your time and dedication.
Nominations Needed for Young Engineers Award ASME International wants to give $5,000 plus a prepaid life membership to a young ASME member that has done an outstanding job in their profession, community, and the work of ASME. If you know someone who deserves to win this award, please nominate a young engineer for the Old Guard Young Engineers Award today! For more information, visit http://www.asme.org/cma/og/youngengineer.html .
Professional Development Professional Education Courses: Two new products are at the ASME PE and FE Exam Review
Center. New FE Workbook and CD-Rom and the PE Exam Review on DVD ASME Online Short Courses: New titles include Project Management and Advanced GD&T. Prefer training on CD-Rom? Go to http://www.asme.org/education/disted/computer.htm. New ASME Corporate Online Training Library: Meet all your mechanical engineering training needs in one economical package tailored to your company. Go to http://www.asme.org/education/disted/library.htm. Please continue responding to the online survey at http://www.asme.org/sections/pgh/pdsurvey.html. Future topics will be selected based on member input.
Public Affairs What's going on in Washington D.C.? Visit Government Relations , a weekly review of the latest legislative,regulatory, pollicies, and issues from Washington.
Updates Section E-mail List Moved The Section E-mail list has been moved from Listbot to YahooGroups. The Listbot service is no longer available. If you'd like to receive timely news from ASME International, job opportunities, events, etc., consider joining the Section e-mail list (simply send an e-mail to asmepghnews-subscribe@yahoogroups.com. Instructions are also on http://www.asme.org/sections/pgh/joinlist.html)?
|
* SECTION * Renew your membership? Add your program ideas for next year? Send them to Lori Rankin. Consider getting involved with any of our activities? There are many ways, such as Industry Relations, Engineer's Week, Science Fair, Awards Banquet, web site, discussion list. Contact Lori Rankin. Consider signing up to be an e-Mentor? Make sure that your contact information is up to date? We will increasingly use electronic means to contact our members so please be sure your e-mail and fax numbers are accurate. Set up your e-mail alias? You can have a yourname@asme.org address that you can conveniently manage yourself. People will always be able to locate you, regardless of your work situation. Download
your ASME screensaver?
Show your interest in a Professional Development course by taking the survey? Think about articles, tips, brain teasers, news, how-to's, etc. you can contribute to our newsletter? Consider joining the Section e-mail list? Consider getting involved with the Executive Committee? You can get involved in any capacity. If you can contribute only one hour a week, we would be grateful for your time. Contact anyone in the committee.
|
©
Copyright 1999-2005, ASME Pittsburgh Section. All rights reserved.
Please send comments to the webmaster, horner@asme.org
